Log Splitter 5ton Premium Electric Log Splitter 5 Ton Lumag HOS5N
Original price was: £399.00.£319.00Current price is: £319.00. (£265.83 + VAT)
In stock
Introducing the Lumag HOS5N 5ton Electric Log Splitter.
- 5 Ton Splitting Force
- Heavy Steel Constuction (much stronger than similar looking models)
- Premium Coper wound motor.
- Long stroke with max Log of 520mm.
- Incudes Stand.
- 2 hand saftey operation.
- Developed over 2 decades with tens of thousands sold!
Log Splitter 5ton Electric Log Splitter 5 Ton Lumag HOS5N
The Lumag HOS5N Log splitter has a powerful 1.5KW Motor. This motor is a premium copper wound (rather than cheaper and lighter alloys) designed to last!
The Log Splitter hydraulic system runs at a very high pressure with a good flow rate allowing the machine to work quickly and powerfully. Due to the efficient hydraulic system, the splitter runs forward at 3.2cm per second and returns a speed of 6.5cm/s.
To save time further the machine is fitted with a stop clamp. This prevents the machine’s splitter from running back to the stop position on each stoke. The machine can split logs up to 520mm down to 150mm. The Lumag HOS5N can handle logs from 50mm to 250mm diameter.
Free stand! the log splitter comes with a free stand allowing you to work at comfort at waste height.
As all machines of this type should our Lumag HOS5N Log splitter meets all the latest UK and EU safty standards and comes with saftey covers and 2 hand opertation.
The machine is the stongest and best value machine of this type on the market and comes with a 5 year warranty.
Video show the older model with no gaurds.
| operating voltage | 230V / 50Hz |
| Motor power P1 / P2 | 1.5 kW / 0.989 kW |
| operating mode | S3 80% |
| Engine speed | 2,820 1 / min |
| protection | IP54 |
| splitting force | 5 t |
| Spaltgutlänge | 150 – 520 mm |
| Splitting diameter | 50 – 250 mm |
| Oil flow | Max. 3.2 l (HLP46) |
| hydraulic pressure | 18 MPa |
| forward speed | about 3.2 cm / s |
| Return speed | about 6.5 cm / s |
| Weight (net / gross) | 59/63 kg |
| Packaging dimensions (L / B / H) | 960 x 380 x 510 mm |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.
