Lumag BSF15 Petrol Stump Grinder
£1,189.00 (£990.83 + VAT)
In stock
Lumag BSF15 Petrol Stump Grinder
The Lumag BSF15 Stump grinder is a lightweight, handy device specifically designed to grind small tree stumps and roots from 600 mm above ground level to 235 mm below ground level.
The stump grinder is powered by a 15hp pull start, single cylinder petrol engine, this rotates the heavy duty 300mm diameter stump grinding wheel at 3600 revs per minute, making light work of any stump and tree roots with is 9 carbide tipped teeth, With the thick carbide elements on the stump grinding ?teeth they can be re sharpened many times making the machine very cost effective to run. The stump grinders engine transmits it power to the stump grinding wheel via a heavy-duty centrifugal clutch and two thick drive belts.
The stump grinder strong steel frame has a wheelbase of only 80cm making access into most locations very easy, the transport of the stump grinder is further aided by the large pneumatic tyres making traversing rough ground very easy. When you reach the work area with the stump grinder you apply the hand brake this locks the drum brake on the left wheel, this allow for the well balance stump grinding machine to be arched from left to right across the stump milling it a way. The stump grinders handle has a wide range of adjustment allowing it to be adjusted to the most comfortable position for the operator depending on whether the stump being ground is above or bellow ground level. The stump grinders adjustable handle also allows them to be folded over for storage.
To prevent debris being from being thrown out from under the stump grinder the machine has been fitted with rubber deflectors further safety features on the stump grinder consist of a ?dead man?s handle? safety lever cutting out the engine when the handle is release. The stump grinders drive belts and grinding wheel are also protected by guards.
The stump grinder weights only 110KG making it easy to handle and manoeuvre.
The Lumag BSF15 is the best value stump grinder on the market offering quality, excellent price and full spare back up.
The Lumag stump grinder is protected by a year business warranty and 2-year domestic warranty.
*Delivered fully assembled & ready to use*
If you need any spare parts please follow the link below.
Lumag BSF15 Spare Parts
If you need finance for your stump grinder please follow the link below
Lumag Finance?
| Motor / drive | 1-cylinder, 4-stroke OHV petrol engine |
| Engine power | 9.0 kW |
| Displacement | 420 cc |
| Fuel content | 6.5 l |
| Oil tank volume | 1.1 l |
| Starting system | Manual start |
| Milling disc Ø | 300 mm |
| Milling under the ground | 235 mm <BR> above the floor: 600 mm |
| Milling over the ground | 600 mm |
| number of teeth | 9 |
| Weight (net / gross) | 110/115 kg |
| Packing dimensions (L / W / H) | 1060 x 800 x 580 mm |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.
Spares & Accessories…
-
-
-
Pull start for BSF15 stump Grinder (NOT LONCIN ENGINE), HC15 and HC15H Chippers (Four bolt)
£74.99 (£62.49 + VAT)Available on back-order
-
-
-
