Lumag Distribution

• Operating voltage 230v
• Motor power 2kw
• Idle speed 1500 rpm
• Running speed 2800rpm
• Operating current  16A
• Protection class IP54
• Table size 1150 x 510 mm
• Blade sizes 350 x 30 mm
• Max operating speed 80 m/s
• Cutting depth 107 mm
• Max cutting length 1200 mm
• Tilt angle 0-45°
• Water capacity 32L
• Sound Pressure 72db (a)
• Sound Level 85db (a)
• Weight 137kg
• Dimensions (L x W x H) 1460 x 770 x 1500 mm
• Packaging Dimensions 1535mm x 750mm x 700mm
• INCLUDES blade worth £79.00

TIMESCALES

We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.

Where possible your machine will be delivered fully assembled and ready to use.  In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.

COST

We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).

Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.

We do offer premium delivery services. As a rough guide, the delivery charges are as follows:

• Delivery before 12:00 £14.00 (exc VAT)
• Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
• Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)

Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).

DELIVERY ADDRESS

Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.

CHECKING AND SIGNING FOR DELIVERIES

Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.

It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.

Any shortages or damage must be reported to Lumag within 24 hours.

A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.

Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.

All Masonry Saws are covered by a 2 year domestic warranty (1 year for commercial).

Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.