Lumag GF800 Petrol Trencher (600mm Max Depth)

£2,299.00 (£1,915.83 + VAT)

Only 1 left in stock

Lumag GF800 Petrol Trencher (600mm Max Depth)

Or use any major Debit or Credit Card at checkout
  • Visa Card
  • MasterCard
  • American Express
SKU: GF800 Categories: ,

The Lumag GF800 trencher enables you cut trenches 100 mm wide by 600 mm deep, quickly and easily. This machine has a strong steel chassis and large rubber tyres which make it easy to move over rough ground. It is powered by a 420cc Loncin engine and it?is great for laying pipes and cables. The cutting bar is adjusted by moving the notched out handle on the near side of the machine. The teeth are carbide tipped and hard wearing. The spoil is cleared from the chain area by a side mounted auger. For safety, the machine is fitted with a ?dead-mans safety switch?. It is possible for this machine to be fitted with a?Honda engine?at an additional?cost.

Equipment features:

– The GF-800 is characterized by simple operation and robust construction
– This machine is a must when laying underground cables, bringing in drainage and working in the irrigation industry
– Equipped with a particularly long sword as standard, for max. Digging depth of 60 cm and digging width of 10 cm
– A snail removes excavated soil for a particularly clean result
– The chain is equipped with hard metal tipped teeth

*Delivered fully assembled & ready to use*

Motor / drive 1-cylinder 4-stroke engine G420F
Displacement 420 cc
Engine power 9.0 kW
fuel Unleaded petrol
Fuel content 6.5 l
Oil tank volume 1.1 l
Starting system Manual start
Milling width Max. 100 mm
Milling depth Max. 600 mm (adjustable in 3 steps)
Sound power level LWA 114 dB (A)
Dimensions (L / W / H) 2100 x 720 x 1100 mm
Weight (net / gross) 180/195 kg
Packing dimensions (L / W / H) 1130 x 750 x 730 mm

TIMESCALES

We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.

Where possible your machine will be delivered fully assembled and ready to use.  In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.

COST

We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).

Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.

We do offer premium delivery services. As a rough guide, the delivery charges are as follows:

  • Delivery before 12:00 £14.00 (exc VAT)
  • Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
  • Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)

Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).

DELIVERY ADDRESS

Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.

CHECKING AND SIGNING FOR DELIVERIES

Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.

It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.

Any shortages or damage must be reported to Lumag within 24 hours.

A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.

Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.

Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.

Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.

Warranty Conditions

GF800 Parts Drawing