Lumag RPi13N 13.5KN 18″ Petrol Compactor Plate with Water System

£699.00 (£582.50 + VAT)

In stock

The Lumag RPi13N compactor wacker plate comes complete with water tank. It is perfect for use with tarmac or dust suppression. The machine is powered by an excellent Loncin G200 engine which is easy to start and faultlessly reliable. The machine is surrounded by a frame protecting the engine and other workings. As with all our compactor plates you will need to purchase the rubber paving mat and transport axle separately.

 

Or use any major Debit or Credit Card at checkout
  • Visa Card
  • MasterCard
  • American Express
EAN: 4047424006054 SKU: Rpi13N Categories: ,

500mm 114kg with water system

Motor / drive 1-cylinder 4-stroke OHV engine
Engine power 4.1 kW at 3,000 rpm
displacement 196 cm ³
Fuel tank 3.6 l
Motor oil 0.6 l
Board length 585 mm
Plate width 500 mm
frequency 70 Hz
Centrifugal force 13.5 kN
Area performance 450 m ² / h.
Max. Feed 15 m / min.
Vibration shocks 4,200 vpm
Compaction depth 30 cm
Max. Permissible inclined position of the engine 20 °
Sound power level LWA 108 dB ( A )
Operating weight approx. 114 kg
Transport weight approx. 125 kg
Packaging dimensions ( LxWxH ) 750 x 540 x 620 mm

TIMESCALES

We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.

Where possible your machine will be delivered fully assembled and ready to use.  In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.

COST

We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).

Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.

We do offer premium delivery services. As a rough guide, the delivery charges are as follows:

  • Delivery before 12:00 £14.00 (exc VAT)
  • Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
  • Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)

Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).

DELIVERY ADDRESS

Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.

CHECKING AND SIGNING FOR DELIVERIES

Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.

It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.

Any shortages or damage must be reported to Lumag within 24 hours.

A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.

Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.

Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.

Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.

Warranty Conditions

RPi13N Parts Drawing