Stump Grinder Lumag BSF15 15hp Petrol Stump Grinder
Original price was: £1,499.00.£1,189.00Current price is: £1,189.00. (£990.83 + VAT)
In stock
We would like to intoduce the Lumag BSF15 Stump Grinder
- Narrow access fits though a 80cm gateway.
- Folding adjustable handles.
- Loncin 15hp 420cc overhead valve 4 stroke engine
- Extra thick 300mm steel cutter head, with 9 carbide teeth
- Large rubber tyres, for easy movement.
Stump Grinder Lumag BSF15 15hp Petrol Stump Grinder
Remove unwanted stumps and roots without digging with the Lumag BSF15 stump grinder. You can grind away the roots & stumps to a depth of 235mm below ground level and tree stumps up to 60 cm above ground level.
After you have ground away the tree stump. The area can be raked level and repurposed. Stump grinders are the most efficient way of removing roots and tree stumps without back braking digging or the mess and expense of using and excavator.
Robust and heavy thick milling head
The machine is equipped with a thick steel milling head with a diameter of 30 cm. Mounting 9 high-quality carbide tip teeth. Each tooth is mounted to the milling head with 2 bolts. The machine has 3 left, 3 right and 3 straight teeth.
Compact, agile yet very powerful
The Lumag BSF15 has a width of 80cm so can fit through most gate ways. You can easily move and transport the stump grinder due to the presence of two large pneumatic tires. To operate the stump grinder you apply the handbrake locking one wheel and swivel the machine from left to right
Powerful 4 Stroke Premium Loncin 420cc petrol engine
The Lumag BSF15 stump grinder is equipped with a very powerful and reliable Loncin 15 hp petrol engine. This engine is easy to start and fuel efficient.
Motor / drive | 1-cylinder, 4-stroke OHV petrol engine |
Engine power | 9.0 kW |
Displacement | 420 cc |
Fuel content | 6.5 l |
Oil tank volume | 1.1 l |
Starting system | Manual start |
Milling disc Ø | 300 mm |
Milling under the ground | 235 mm <BR> above the floor: 600 mm |
Milling over the ground | 600 mm |
number of teeth | 9 |
Weight (net / gross) | 110/115 kg |
Packing dimensions (L / W / H) | 1060 x 800 x 580 mm |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.