PTO Wood Chipper Lumag HC20HZ 200mm Capacity
£3,899.00 (£3,249.17 + VAT)PTO Drive Hydraulic infeed Chipper Mulcher 20cm Capacity
Only 1 left in stock
The Lumag brand is known throughout Europe for the professional quality and affordable price. We offer a wide variety of Wood Chippers, Mowers, Stump Grinders, Trenchers, Road Sweepers and Post Hole Borers to meet all of your grounds care needs.
Showing all 48 results
PTO Drive Hydraulic infeed Chipper Mulcher 20cm Capacity
Only 1 left in stock
Features: – The PTO-powered RAMBO-HC15HZ effortlessly shreds branches up to a diameter of 120 mm. – Hydraulic feed roller with forward and return for easier work – The professional disc wheel shredder with two knives and a counter knife also processes unruly material. – 10 movable blades on the disc wheel crush the already chopped…
Out of stock
The Lumag HC15H RAMBO Garden Chipper Shredder
Lumag designed the HC15 RAMBO Chipper to break down branches and sticks up to a 120mm diameter. The Chipper is powered by a 15HP single cylinder petrol engine, featuring a 12-volt electric key starting devise. The engine transmits its power to the chipper flywheel via a centrifugal clutch and a pair of thick rubber drive belts.
The chipper is a “Flywheel” type design chipper, the flywheel spins rapidly chipping the branches, any leafy green debris is pulled into the impeller and broken down further before being blown out of the chute. The Lumag HC15H Chipper has a hydraulic in feeding device allowing branches to be fed into the chipper in a safe and controlled manner, metering the infeed to the chipper to keep the chipping flywheel at optimum speed and efficiency.
The Lumag HC15H Chipper shredder is mounted on an 870mm wide towable chassis with a 50mm ball hitch. The chipper is fitted with large pneumatic tires making it easy to handle and maneuver to your desired chipping area. The intake hopper of the chipper is also fitted with a hinge making access to the chipper drum and blades very easy. The chipper outlet chute is fitted with a 360-degree swivel head allowing the material from the chipper to be directed to where you need.
The Lumag HC15H Chipper is fitted with emergency cut switch the chipper’s other safety features include a belt guard covering the chippers drive belts.
The Lumag HC15H Chipper is covered by a 1-year business use warranty and 2-year domestic use.
The Chipper has full spare parts back up and customer service.
*Delivered fully assembled & ready to use*
Only 1 left in stock
Introducing the Lumag HM200 Petrol Power Branch Logger, your ultimate solution for efficient and powerful wood processing. Designed for both professional and domestic use, this high-performance branch logger is ideal for turning branches and garden waste into valuable, easily manageable logs for your fire!
Only 1 left in stock
The Lumag MD500E is a versatile, silent and environmentally friendly electric power barrow. It has an all-electric drive with pneumatic tipping assist ram. It is easy to use and has a 500kg capacity.
Only 1 left in stock
The Lumag MD500H mini dumper is based on the original Lumag MD500 chassis. It offers the same reliable, easy starting Loncin engine and simple drive system but with a “dumper style” tipping butt that is more suited for shifting sand, soils etc. Tipping is fully mechanised by the hydraulic ram. The machine is still only 700mm wide and great to get in those hard to reach areas. MD300 style box and Plough are all available as extras.
*Delivered fully assembled & ready to use*
Available on back-order
Lumag GF800 Petrol Trencher (600mm Max Depth)
Out of stock
New Lumag HC15L
EAN: 4047424008980
SKU: RAMBOHC15L
In stock
The Lumag MD500 mini dumper is a handy little dumper that takes the back ache out of a huge variety of material handling tasks. Whether it’s moving paving stones to a patio at the end of a garden, stone walling rocks up a steep path or just logs for the fire the removable drop sided skip can do it all. Tipping is assisted by a pneumatic ram. This machine is powered by an excellent Loncin engine which is easy to start and ever reliable. At only 770mm wide this machine is great even when access is limited.
*Delivered fully assembled & ready to use*
Out of stock
.*Delivered fully assembled & ready to use*
Out of stock
The Lumag MD500E is a versatile, silent and environmentally friendly electric power barrow. It has an all electric drive with pneumatic tipping assist ram. It is easy to use and has a 500kg capacity.
*Delivered fully assembled & ready to use*
In stock
The Lumag HGM-85055 Petrol Mulching Mower is great for clearing rough grass areas. This mulching mower is self propelled and comes equipped with a 55cm Oregon mulching blade that cuts the same material several times aiding the fast decomposition, which is fully guarded all the way round, and also has rubber flaps to reduce flying debris. It has easy to use controls, the clutch and self propel leavers can be used simultaneously or individually depending on use needed.
The mulching mowers handles are height adjustable for ease of use and comfort for your wrists and can fold over fully making it easier to store when not in use, or for low overhead branches. It has “pneumatic agri” style tires for extra grip, due to it’s tires it’s suitable for rougher ground or higher grass and more difficult areas. For finer finished areas you can attach the fully height adjustable front dolly wheel or leave it off. It’s easy to adjust using the tool provided which fits neatly onto the side of the dolly wheel to enable the user to quickly adjust the height wherever you are.
The HGM-85055 mulching mower comes with a powerful 6hp at 3600rpm, 11.9nm of torque,1 cylinder,4 stroke, Briggs and Stratton 850 series petrol engine, holding 1.1 litres of fuel with a easy pull starter and priming button. It has a heavy duty belt tensioning device and a hard wearing v-belt drive, mounted on robust bearings that rotates the cutting shaft, The HGM-85055 mulching mower also comes with a knock down bar that pushes down higher plants, tall grass and the like to enable a good cut with the first pass with the mulching mower.
The mulching mower will work safely on inclines up to 20 degrees and at only 70kg the mulching mower design is easy to use over a variety of terrain and gardens and adaptable to suit many uses.
The Lumag HGM-85055 petrol mulching mower is covered by a 1-year business use warranty and 2-year domestic use.
The mulching mower has full spare parts back up and customer service.
*Delivered fully assembled & ready to use*
Out of stock
The Lumag GF450 Trencher enables you cut trenches 100mm wide and 450mm deep quickly and easily. This machine is great for laying pipes and cables. Its strong steel chassis and large rubber tyres make moving over rough ground easier. The cutting bar is adjusted by moving the notched out handle on the near side of the machine. The teeth are carbide tipped and hard wearing. The spoil is cleared from the chain area by a side mounted auger. The machine is fitted with a “dead-mans safety switch” and is powered by a 196cc Loncin engine. It is possible for the GF450 to be fitted with a Honda engine at an additional cost.
*Delivered fully assembled & ready to use*
In stock
Lumag RAMBO HC15 120mm Petrol Wood Chipper
Available on back-order
The self propelled Lumag HGS87564 Petrol High Grass and Brush Mower has a powerful Briggs and Stratton engine. The engine powers 4 flails which enable you to quickly and easily cut through reeds, brambles, tall grass, nettles ect. The side bar can be fitted to lay the grass info tidy swathes. The machine is fitted with…
Out of stock
*Delivered fully assembled & ready to use*
In stock
Transform your lawn care routine with the Lumag HGM550 Mulching Mower. Designed for efficient and eco-friendly mowing, this powerful mower is perfect for maintaining lush, healthy lawns in residential and commercial settings. Featuring a robust engine and innovative mulching capabilities, the HGM550 ensures your lawn looks pristine while promoting soil health. Great for rough areas and verges!
Out of stock
Lumag BSF15 Petrol Stump Grinder
Out of stock
Robot Mower Cable Laying machine
Only 1 left in stock
Features: – The RAMBO-HC10PRO effortlessly shreds branches up to a thickness of 100 mm. – Convenient operation thanks to the large filling funnel. – Integrated chassis with studded pneumatic tires and a detachable drawbar for quick (not for road use), easy repositioning even on rough terrain. – Thanks to the reinforced, professional duplex cutterhead, the…
Out of stock
Loncin Engine single drum high grass flail mower
In stock
The Lumag KM800 road brush has hard wearing nylon bristles can be adjusted to remove anything from light debris from paved areas to scrub stubborn moss off your patio. The 800mm wide brush can be adjusted 15 degrees left or right and is great for clearing small roads and driveways. This machine is powered by a reliable and easy starting Loncin engine and comes complete with a snow plough and collection box worth £192.00.
*Delivered fully assembled & ready to use*
Out of stock
Lumag RAMBO HC10 100mm Petrol Wood Chipper
Available on back-order
Currently expected Late January but this is subject to updates.
In stock
(delivery date subject to change)
In stock
*Delivered fully assembled & ready to use*
In stock
Lumag EB400PRO Two Man Petrol Post Hole Borer / Auger
The LUMAG EB400PRO Petrol 2 Man Post Hole Borer/Auger?is an easy-to-use earth boring machine and allows the excavation of boreholes up to a diameter of 250 mm without much effort. The machine has a diverse range of uses from making holes for fence posts and/or pergolas to digging planting holes. It has a solid steel frame and easy to start 4 stroke engine.
*Delivered fully assembled & ready to use*
In stock
Lumag EB520G Petrol One Man Post Hole Borer / Auger Set
In stock
The Lumag 5SP50 Water Pump is a pump and drive lead for use with our Lumag LFR40 Drive Unit.
Only 1 left in stock
The Lumag LFR15E concrete poker drive unit is a compact and powerful machine. It is designed for use with the Lumag 5FL45 Concrete Poker Lead (not included) and the Lumag 5SP50 Water Pump (not included). This machine is great for applications where noise and/or fumes are an issue.
*Delivered fully assembled & ready to use*
In stock
The Lumag 5EB400250 Post Hole Borer Auger Bit is designed for use with the Lumag EB400PRO 2 Man Post Hole Borer / Auger.
Out of stock
The Lumag 5EB400250 Post Hole Borer Auger Bit is designed for use with the Lumag EB400PRO 2 Man Post Hole Borer / Auger.
In stock
Lumag 5EB400250 250mm Post Hole Borer Auger Bit
In stock
The Lumag 5EB300 300mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
In stock
The Lumag 5EB400200 Post Hole Borer Auger Bit is designed for use with the Lumag EB400PRO 2 Man Post Hole Borer / Auger.
In stock
The Lumag 5EB250 250mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
In stock
The Lumag 5EB400150 Post Hole Borer / Auger Bit is designed for use with the Lumag EB400PRO 2 Man Post Hole Borer / Auger.
In stock
The Lumag 5EB200 200mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
In stock
The Lumag 5EB150 150mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
In stock
The Lumag 5EB100 100mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
Out of stock
The Lumag 5EB80 80mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
Only 1 left in stock
EB400PRO Extension handles (Set of 4)
In stock
Bin Loc: 030202
In stock