Lumag BT800 24″ Petrol Power Float Edger
£849.00 (£707.50 + VAT)
In stock
The Lumag BT800 power float has a specially designed outer ring, with bump rubber, that allows you to work within a few millimeters of walls or steel beams saving hours with a trowel. It has a strong steel frame and is powered by the ever reliable Loncin engine.
*Delivered fully assembled & ready to use*
Equipment features:
– Ideal for areas up to 100 square meters or as a supplement to conventional power trowels or double-wing trowels
– The rotatable protective ring enables problem-free bypassing of supports and pipes, as well as smoothing up to the wall. This minimizes time-consuming rework.
Optional accessories:
– Wing 260 x 150 mm (Art. No. 5BT800F, EAN: 40 47424 00533 0)
– Disk Ø 790 mm (Art. No. 5BT800D, EAN: 40 47424 00532 3)
Motor / drive | 1-cylinder 4-stroke OHV LONCIN G200F engine |
Motor power P1 / P2 | 4.8 / 4.1 kW at 3,000 rpm |
displacement | 196 cm ³ |
Fuel tank | 3.6 l |
Motor oil | 0.6 l |
Start system | Reversing starter |
Rotor diameter | 760 mm |
Number of sheets | 4th |
Sheet size ( L / B ) | 260/150 mm |
Blade angle | 0 – 15 ° |
speed | 60 – 100 rpm |
Sound power level LWA | 108 dB ( A ) |
Concrete slurry weight ( net / gross ) | 49/55 kg |
Concrete slate packaging dimensions ( LxWxH ) | 810 x 810 x 350 mm |
Motor weight ( net / gross ) | 16/19 kg |
Motor packaging dimensions ( LxWxH ) | 312 x 376 x 335 mm |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.