Lumag GF450 Petrol Trencher (450mm Max Depth)
£1,729.00 (£1,440.83 + VAT)
In stock
The Lumag GF450 Trencher enables you cut trenches 100mm wide and 450mm deep quickly and easily. This machine is great for laying pipes and cables. Its strong steel chassis and large rubber tyres make moving over rough ground easier. The cutting bar is adjusted by moving the notched out handle on the near side of the machine. The teeth are carbide tipped and hard wearing. The spoil is cleared from the chain area by a side mounted auger. The machine is fitted with a “dead-mans safety switch” and is powered by a 196cc Loncin engine. It is possible for the GF450 to be fitted with a Honda engine at an additional cost.
*Delivered fully assembled & ready to use*
450mm Trencher
| Motor / drive | 1-cylinder 4-stroke engine G200F <BR> <BR> 1-cylinder 4-stroke engine G200F |
| Engine power | 4.1 kW |
| Displacement | 196 cc |
| Fuel content | 3.6 l |
| Oil tank volume | 0.6 l |
| Starting system | Manual start |
| Milling width | Max. 100 mm |
| Milling depth | Max. 450 mm (adjustable in 4 steps) |
| Dimensions (L / W / H) | 1960 x 900 x 1350 mm |
| Operating weight | approx. 150 kg |
| Packing dimensions (L / W / H): | 1060 x 720 x 850 mm |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.
