Lumag RAMBO HC15H 120mm Wood Chipper with Hydraulic Feed
£3,599.00 (£2,999.17 + VAT)
Only 1 left in stock
The Lumag HC15H RAMBO Garden Chipper Shredder
Lumag designed the HC15 RAMBO Chipper to break down branches and sticks up to a 120mm diameter. The Chipper is powered by a 15HP single cylinder petrol engine, featuring a 12-volt electric key starting devise. The engine transmits its power to the chipper flywheel via a centrifugal clutch and a pair of thick rubber drive belts.
The chipper is a “Flywheel” type design chipper, the flywheel spins rapidly chipping the branches, any leafy green debris is pulled into the impeller and broken down further before being blown out of the chute. The Lumag HC15H Chipper has a hydraulic in feeding device allowing branches to be fed into the chipper in a safe and controlled manner, metering the infeed to the chipper to keep the chipping flywheel at optimum speed and efficiency.
The Lumag HC15H Chipper shredder is mounted on an 870mm wide towable chassis with a 50mm ball hitch. The chipper is fitted with large pneumatic tires making it easy to handle and maneuver to your desired chipping area. The intake hopper of the chipper is also fitted with a hinge making access to the chipper drum and blades very easy. The chipper outlet chute is fitted with a 360-degree swivel head allowing the material from the chipper to be directed to where you need.
The Lumag HC15H Chipper is fitted with emergency cut switch the chipper’s other safety features include a belt guard covering the chippers drive belts.
The Lumag HC15H Chipper is covered by a 1-year business use warranty and 2-year domestic use.
The Chipper has full spare parts back up and customer service.
*Delivered fully assembled & ready to use*
Features:
– The RAMBO-HC15H effortlessly shreds branches up to a diameter of 120 mm.
– Hydraulic feed roller with forward and reverse motion for easier work
– Integrated chassis with drawbar for quick, easy repositioning. Tow bar/hitch – not for road use.
– Rotatable discharge chute with adjustable discharge flap – The professional disc wheel chopper with two knives and one counter knife also processes stubborn material.
– 10 movable blades on the disc wheel shred the already chopped clippings again in order to get an even finer ejection.
– The 4 blades attached to the rear of the disc wheel eject the clippings through the 360 ° rotatable and 80 cm high discharge chute.
– The feed hopper and a maintenance flap above the feed roller can be folded to the side to clean the feed roller
engine | 4-stroke OHV petrol engine |
Displacement | 420 cc |
Engine power, max. | 9.0 kW at 3,600 rpm |
fuel | Unleaded petrol |
Tank volume | 6.5 liters |
Oil tank volume | 1.1 liters |
Hydraulic oil volume | 4.0 liters |
Starting system engine | Manual and electric start |
Branch thickness Ø, max. | 120 mm |
Speed of the knives | 2,250 rpm |
Weight (net / gross) | 289/330 kg |
Guaranteed sound power level LWA | 114 dB (A) |
Dimensions (L / W / H) | 2900/965/1800 mm |
Packaging (L / W / H) | 1600/870/1230 |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.