Wood Chipper Lumag RAMBO HC10 Petrol Garden Chipper 196cc 100mm Capacity
£935.00 (£779.17 + VAT)
In stock
The Lumag RAMBO HC10 wood chipper
- Great for sticks with a diameter of up to 10cm maximum and works best with a continuous feed of 6 to 8cm.
- Drum chipper with twin blades and counter knife.
- For leafy branches, Sticks and twigs.
- This is a chipper, not a shredder and is not to suited for use with green waste such as leaves on their own.
- Powerful 6Hp 196cc 4 stoke Over Head Valve Premium Loncin Engine.
- Easy to move with the balanced chassis and large rubber tyres.
- Hour Clock incuded.
- Cover is supplied with the chipper.
- 360 degree swivel chute.
Wood Chipper Lumag RAMBO HC10 Petrol Garden Chipper 196cc 100mm Capacity
Wood Chipper Lumag RAMBO HC10 Petrol Garden Chipper 196cc 100mm Capacity
Powerful engine
The Lumag RAMBO HC10 Wood chipper is fitted with a powerful and reliable preiumum brand Loncin G200 4 stroke overhead valve engine. You will find this engine easy to start and very reliable and with 6 HP its more than powerful enough to get the job done.
Chipping System
The wood chipper is fitted with a duplex drum system driven by a twin belt drive. The duplex drum system has 2 Blades and counter blade. As the drum spins the blade chips the material against the counter blade. When the blades are worn out they can be rotated for further use.
Chasiss
The RAMBO HC10 Wood Chipper is designed to be easy to move around. The intake hopper is fitted with handles allowing you to tilt the chipper back on its large pneumatic tyres and push the machine around your garden with relative ease.
Hoppers
The intake hoppers are large and allow the feeding of “wonky branches” into the chipper with minimal pre-cutting. As with all chippers you will get the odd blockage. The intake hopper in hinged, so with the removal of 2 nuts you can hinge the hopper open quickly and easily aiding the clearing of blockages. The Lumag RAMBO HC10 also features the 360deg swivel chute on the outlet allowing you to a direct the chippings where you need them.
Use
These are great little chippers and ideal for chipping branches around your garden with a maximum size of 10cm. You will find 10cm branches slow work and if you regularly need to process wood of this size, we suggest a bigger machine. From experience we have found that for continuous work the machine is ideal for material around 60-80mm (or 2-3”). This machine is a wood chipper as apposed to a Chipper shredder (or Shedder), So leafy branches, and woody shrubs work well, but the machine is not suitable for use solely with green waste such as leave.
Additional features
In addition to the premium engine and the 360 Deg Swivel the Lumag RAMBO HC10 is fitted with an hour clock to monitor use it and is supplied with a cover.
You will find below a few items that will be needed though the life of your machine, you could save youself some shipping costs and have the benift of having the itmes on hand by adding these to your order now.
Note: the video show the old model prior to the addion of the 360 degree swivel chute.
| engine | 4-stroke OHV petrol engine |
| Displacement | 196 cc |
| rated capacity | 4.1 kW at 3,600 rpm |
| fuel | Unleaded petrol |
| Tank volume | 3.6 liters |
| Engine oil | 0.6 l SAE 10W30 or 40 |
| Engine starting system | Manual start |
| Branch thickness Ø, max. | 100 mm |
| Speed of the knives | 2,400 rpm |
| Weight (net / gross) | 85/100 kg |
| Guaranteed sound power level LWA | 111 dB (A) |
| Packaging (L / W / H) | 880/565/840 mm |
| Dimensions (L / W / H) | 1670/570/1060 mm |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.
| No. | Art.No. | Description | Addition |
|---|---|---|---|
| 2 | 3HC1000EW02 | Knife drum | |
| 2 | 3HC1000EW02b | Knife drum (update) | |
| 3 | 3HC1000EW03 | Knife shaft | |
| 5 | 3HC1000EW05 | wheel | |
| 6 | 3HC1000EW06 | V-belt pulley | |
| 6 | 3HC1000EW06b | V-belt pulley (update) | |
| 7 | 3HC1000EW07 | V-belt SET 13x865Li | |
| 8 | 3HC108 | V-belt cover | |
| 9 | 3HC1000EW09 | Centrifugal clutch incl. V-belt pulley | |
| 11 | 3HC1000EW11 | Bearing cutter | |
| 14 – 15 | 3HC1000EW14b | Ejector shaft round | |
| 16 | 3G200F | Motor G200F (crankshaft 19mm) | |
| 17 | 3HC1000EW17 | Motor mounting plate | |
| 18 | 3HC1000EW18 | Feed hopper | |
| 18 | 3HC1000EW18a | Feed hopper (foldable) | |
| 21 | 3HC1021 | Emergency stop bracket | in SET, part no. 21+29 |
| 23 | 3HC1000EW23 | Protective rubber feed hopper | |
| 26 | 3HC1000EW26 | Counter knife | |
| 28 | 3HC1000EW28 | Handle | |
| 29 | 3HC1021 | Emergency stop bracket | in SET, part no. 21+29 |
| 3HC1000EWPF | Key V-belt pulley bottom | ||
| 3HC1032 | Rubber foot | ||
| 3HC10AH | Cover (material Oilskin) | ||
| 3HC10SKL | Protective cap bearing | ||
| 3HC10SL | Screw long for bearing mounting | ||
| 3HC10SLb | Screw short f. Bearing fixing | ||
| other parts on request |
Spares & Accessories…
-
-
-
Single Counter blade / Lower Blade for Lumag HC10/HC10PRO /HC1000EW Chippers
£59.16 (£49.30 + VAT)In stock
-
