Lumag SSA400Z PTO Firewood Processor

Original price was: £6,999.00.Current price is: £5,999.00. (£4,999.17 + VAT)

Only 1 left in stock

The Lumag SSA400z PTO Firewood Processor enables a single person to saw and split firewood in a smooth and efficient manner. The wood is sliced by the chainsaw to your desired length and then dropped down into the splitting chamber where it is split. This solidly built machine is on a trailer chassis and can be easily moved around site (not road legal) the conveyor and roller table can be folded up for easy storage.

Or use any major Debit or Credit Card at checkout
  • Visa Card
  • MasterCard
  • American Express
SKU: SSA400Z Categories: ,

Equipment features:

The saw-splitting machine SSA-400Z is attached to the three-point hydraulic system of the tractor and the power is transmitted from the tractor through a cardan shaft.

– Processing of logs by sawing and splitting in one pass
– Two-hand safety operation
– 5-8 m³ of wood can be processed per hour
– Automatic removal of the material with a belt conveyor


drive PTO
Tractor power requirement approx. 20 hp
Hydraulic motor chainsaw Max. 3,000 rpm
Hydraulic motor conveyor belt Max. 284 rpm b. 110 bar, 285 Nm
chainsaw hydraulic
Chain (STIHL) K2L-BL-072, 325.058 “/ 1.5mm
Sword (STIHL) 50 cm
Billet length, adjustable 20 to 55 cm
Wood diameter min. / Max. 10 to 35 cm
Working speed 13.75 cm / sec.
Reverse speed 18.33 cm / sec.
Splitting power 10 t
Conveyor belt (LxWxH) 3200 x 150 x 2800 mm
Conveyor speed 0.8 m / sec.
Weight including conveyor belt 420 kg
VP saw splitting machine (LxWxH) 1800 x 720 x 1100 mm
VP conveyor belt (LxWxH) 1860 x 580 x 430 mm


We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.

Where possible your machine will be delivered fully assembled and ready to use.  In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.


We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).

Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.

We do offer premium delivery services. As a rough guide, the delivery charges are as follows:

  • Delivery before 12:00 £14.00 (exc VAT)
  • Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
  • Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)

Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).


Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.


Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.

It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.

Any shortages or damage must be reported to Lumag within 24 hours.

A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.

Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.

Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.

Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.

Warranty Conditions

SSA400Z Parts Drawing

Spares & Accessories…