Lumag STM450-700 Electric Masonry Saw Bench
£1,099.00 (£915.83 + VAT)
In stock
*SPECIAL ORDER ONLY*
The Lumag STM450-700 Masonry Saw Bench is an excellent tool for accurate and safe cutting of tiles and masonry. Made to incorporate a dust suppression water tray and adjustable cutting head that enables you to tilt the blade 45 degrees in either direction. As with all out masonry cutting saws, you will need to purchase cutting disks separately.
*Delivered fully assembled & ready to use*
450mm 230v 16amp stone saw
Operating voltage | 230 V / 50 Hz |
Engine power | 2.0 kW S6 40% |
Idle speed | 2,800 rpm |
Operating current | 9 A |
Protection class | IP 54 |
Dimensions ( LxWxH ) | 1240 x 590 x 1290 mm |
Table size | 530 x 430 mm |
PREMIUM diamond disc, segm. | Ø 450 x 30 mm |
Maximum working speed | 80 m / sec. |
Max. Depth of cut | 140 mm |
Max. Cutting length | 700 mm |
Tilt angle | 0 – 45 ° |
Water pan, volume | 37.8 l |
Sound pressure level LPA | 72 dB ( A ) |
Sound power level LWA | 85 dB ( A ) |
Weight ( net / gross ) | 85/100 kg |
Packaging dimensions ( LxWxH ) | 1230 x 615 x 590 mm |
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.