The Lumag RPi12 compactor wacker plate comes complete with water tank, transport wheels and rubber mat. It is perfect for use with tarmac or dust suppression. The machine is powered by an excellent Loncin G200 engine which is easy to start and faultlessly reliable. The machine is surrounded by a frame protecting the engine and other workings.
As with all our compactor plates you will need to purchase the rubber paving mat and transport axle separately:
– The forward running vibration plate is particularly suitable for paving work, repair work in pathways, gardening and landscaping.
– The water sprinkling is indispensable when compacting very dusty surfaces, as well as for all asphalt and tar work! The water is distributed in front of or under the plate through a nozzle pipe. The amount of water can be regulated and the tank can be removed.
– Foldable handle – compact size for transport and storage.
– Protective grille on the exhaust, handle dampened against vibrations.
– Robust, long-lasting base plate for particularly precise work.
– Equipped with V-belts protected on all sides,
– Protective frame
£625.00 (excl. VAT: £520.83)
*Delivered fully assembled & ready to use by your "Local Dealer"
Lumag RPi12 10.5KN 15″ Petrol Compactor Plate with Water System
In stockSKU: RPI12
|Motor / drive||4-stroke OHV petrol engine|
|Engine power||4.1 kW at 3,000 rpm|
|Tank capacity (fuel)||3.6 l|
|Engine oil||0.6 l|
|Plate size (L / W)||500 x 370 mm|
|Centrifugal force||10.5 kN|
|Area performance||450 m² / hour|
|Max. Feed||20 m / min.|
|Vibration shocks||5,600 vpm|
|Compaction depth||20 cm|
|Sound power level LWA||108 dB (A)|
|Operating weight||approx. 73.7 kg|
|Transport weight||approx. 80 kg|
|Packing dimensions (L / W / H)||750 x 380 x 610 mm|
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
All Petrol engine Wacker Plates are covered by a 5 year domestic warranty (2 year for commercial).
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.