Battery Trench Rammer Lumag VS 80EPRO Includes Battery
£1,999.00 (£1,665.83 + VAT)
In stock
This Lumag VS80EPRO vibratory rammer is very suitable for compacting sand, soil, earth clods, etc. in ditches or narrow passages. Due to the powerful 46.8 Volt battery motor, the VS80EPRO is also suitable for areas that are difficult to access. The biggest advantages of battery machines are: no petrol, much less noise, no stench, no harmful exhaust fumes, no annual maintenance, no starting problems.
The VS80EPRO is equipped with a direct current motor (DC) with a capacity of 2200 Watt (at 4000 rpm). The rated current is 58A. The battery is a 46.8 Volt Lithium Ion battery of 20Ah (936Wh). With a full battery you can stomp for about 40 minutes. An additional battery is available (art. no. 5VS80EPROEA). You can change the battery without using tools. The battery indicates the amount of current available. The charging time of the battery is a maximum of 3 hours.
The machine has an exceptionally high impact force of 1600 Kg / 16kN. The stamping foot has a standard size of (L x W) 34 x 28 cm. A foot of 17cm wide is also available as an accessory (art. no. 5VS80EPROSF).
The weight of the pestle is only 63 Kg.
| engine | 1-cylinder, 4-stroke OHV engine |
| Displacement | 196 cc |
| power | 4.8 kW (6.5 PS) |
| Operating speed | 3,600 rpm |
| Starting device | Reversing starter |
| drive | Gear transmission |
| brake | Automatic safety brake |
| steering | Steering brake |
| Height of side walls | 230mm |
| Landing max. | 300 kg |
| Tilting device | mechanically |
| Working speed forwards / backwards, max. | 3.6 / 1.2 km / h |
| Dimensions | 1595 x 700 x 940 mm |
.6 / 1.2 km/h
TIMESCALES
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
COST
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
DELIVERY ADDRESS
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
Unless otherwise stated, Lumag products come with a 1-2-3 warranty. That’s 1 year for commercial use, 2 year for domestic use and 3 years for engines.
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.
Coming soon …
Coming soon …
