The LUMAG EB-400PRO is an easy-to-use drilling device and enables holes in the ground up to a diameter of 350 mm to be excavated without great effort.
– This robust earth auger is used in forestry, gardening and landscaping.
– Ideal for drilling fence post, foundation and plant holes as well as drainage shafts with the appropriate drilling tool.
– A shaft extension allows the drill to be drilled 455 mm deeper.
– Infinitely variable speed regulator, carburetor with primer pump, maintenance-free ignition (CDI), drilling adapter in solid steel.
Ø 150 / L910 mm drill attachment / Art .: 5EB400150 / EAN 40 47424 04858 0
Ø 200 / L910 mm drill attachment / Art .: 5EB400200 / EAN 40 47424 04859 7
Ø 250 / L910 mm drill attachment / Art .: 5EB400250 / EAN 40 47424 04860 3
Ø 300 / L910 mm drill attachment / Art .: 5EB400300 / EAN 40 47424 04628 3
Ø 350 / L910 mm drill attachment / Art .: 5EB400350 / EAN 40 47424 04629 0
Shaft extension, 455 mm / Art .: 5EB400V455 / EAN 40 47424 04861 0
£495.00 (excl. VAT: £412.50)
Lumag EB400PRO Two Man Petrol Post Hole Borer / Auger
The LUMAG EB400PRO Petrol 2 Man Post Hole Borer/Auger?is an easy-to-use earth boring machine and allows the excavation of boreholes up to a diameter of 250 mm without much effort. The machine has a diverse range of uses from making holes for fence posts and/or pergolas to digging planting holes. It has a solid steel frame and easy to start 4 stroke engine.
*Delivered fully assembled & ready to use*
Only 1 left in stockSKU: EB400PRO
|Motor / drive||4-stroke engine XP140A for unleaded petrol|
|Max. Motor power P1 / P2||2.94 / 2.4 kW|
|Max. Engine speed||3,600 rpm|
|Idle speed||1,600 rpm|
|Max. Drill speed||225 rpm|
|Ignition system||Electronic ignition CDI|
|Fuel tank content||0.75 liters|
|Engine oil||0.55 liters|
|Hand-arm vibrations||6.09 m / s² / K = 1.5|
|Sound pressure level L LpA||83 dB (A)|
|Sound power level LWA||108 dB (A)|
|Weight (net / gross)||25/26 kg|
|Packing dimensions (L / W / H)||430/390/550 mm|
|Dimensions (L / W / H)||670/780/530 mm|
We aim to deliver, next day, on orders to Mainland UK (excluding the Highlands, Islands and Grampian) placed before 2pm, subject to stock.
Where possible your machine will be delivered fully assembled and ready to use. In some cases, such as the HC15 Chipper, the final fitting of the hopper will be left for you to fit to avoid incurring additional transport costs.
We offer free delivery to Mainland UK (excluding the Highlands, Islands and Grampian) on Retail orders over £100.00 (exc VAT).
Delivery to the Highlands, Islands, Grampian and Ireland (North and South) will incur additional charges.
We do offer premium delivery services. As a rough guide, the delivery charges are as follows:
- Delivery before 12:00 £14.00 (exc VAT)
- Timed delivery between 10:00 and 16.00 £28.00 (exc VAT)
- Saturday delivery between 09:00 and 13:00 £60.00 (exc VAT)
Failed deliveries, even in cases where the initial delivery cost was free, will be subject to a redelivery charge of £12.50 (exc VAT).
Please note that payments made by Paypal/taken over the phone must be sent to the registered Paypal address/ billing address that the card is registered to. If you wish for your machine to be delivered to a different address payment will need to be made via our website, payment link or bank transfer.
CHECKING AND SIGNING FOR DELIVERIES
Lumag will not accept claims for damages or shortages once the delivery has been signed for as checked and complete.
It is the Customers responsibility to examine the goods immediately and ensure that any shortages or damage are noted on the driver’s consignment note.
Any shortages or damage must be reported to Lumag within 24 hours.
A failure to report damage/defects within the above timescales shall release Lumag from any liability for the defects in question.
Lumag shall be entitled, as it sees fit, to either remedy the shortages or damage that have been reported in due time or replace the delivered goods within an appropriate grace period.
All Augers are covered by a 2 year domestic warranty (1 year for commercial).
Your Warranty will be registered by the Retailer from whom you purchased the machine. You will be contacted by Lumag to confirm that your Warranty has been registered.