Showing 49–96 of 154 results
The Lumag HGM-85055 Petrol Mulching Mower is great for clearing rough grass areas. This mulching mower is self propelled and comes equipped with a 55cm Oregon mulching blade that cuts the same material several times aiding the fast decomposition, which is fully guarded all the way round, and also has rubber flaps to reduce flying debris. It has easy to use controls, the clutch and self propel leavers can be used simultaneously or individually depending on use needed.
The mulching mowers handles are height adjustable for ease of use and comfort for your wrists and can fold over fully making it easier to store when not in use, or for low overhead branches. It has “pneumatic agri” style tires for extra grip, due to it’s tires it’s suitable for rougher ground or higher grass and more difficult areas. For finer finished areas you can attach the fully height adjustable front dolly wheel or leave it off. It’s easy to adjust using the tool provided which fits neatly onto the side of the dolly wheel to enable the user to quickly adjust the height wherever you are.
The HGM-85055 mulching mower comes with a powerful 6hp at 3600rpm, 11.9nm of torque,1 cylinder,4 stroke, Briggs and Stratton 850 series petrol engine, holding 1.1 litres of fuel with a easy pull starter and priming button. It has a heavy duty belt tensioning device and a hard wearing v-belt drive, mounted on robust bearings that rotates the cutting shaft, The HGM-85055 mulching mower also comes with a knock down bar that pushes down higher plants, tall grass and the like to enable a good cut with the first pass with the mulching mower.
The mulching mower will work safely on inclines up to 20 degrees and at only 70kg the mulching mower design is easy to use over a variety of terrain and gardens and adaptable to suit many uses.
The Lumag HGM-85055 petrol mulching mower is covered by a 1-year business use warranty and 2-year domestic use.
The mulching mower has full spare parts back up and customer service.
*Delivered fully assembled & ready to use*
Out of stock
The Lumag GF450 Trencher enables you cut trenches 100mm wide and 450mm deep quickly and easily. This machine is great for laying pipes and cables. Its strong steel chassis and large rubber tyres make moving over rough ground easier. The cutting bar is adjusted by moving the notched out handle on the near side of the machine. The teeth are carbide tipped and hard wearing. The spoil is cleared from the chain area by a side mounted auger. The machine is fitted with a “dead-mans safety switch” and is powered by a 196cc Loncin engine. It is possible for the GF450 to be fitted with a Honda engine at an additional cost.
*Delivered fully assembled & ready to use*
In stock
Lumag RAMBO HC15 120mm Petrol Wood Chipper
Available on back-order
The self propelled Lumag HGS87564 Petrol High Grass and Brush Mower has a powerful Briggs and Stratton engine. The engine powers 4 flails which enable you to quickly and easily cut through reeds, brambles, tall grass, nettles ect. The side bar can be fitted to lay the grass info tidy swathes. The machine is fitted with…
Out of stock
The Lumag MD300 mini dumper is a handy little dumper that takes the back ache out of a huge variety of material handling tasks. Whether it’s moving paving stones to a patio at the end of a garden, stone walling rocks up a steep path or just logs for the fire the removable drop sided skip can assist with it all. Tipping is assisted by a pneumatic ram. This machine is powered by an excellent Loncin engine which is easy to start and ever reliable. At only 650mm wide this machine is great even when access is poor.
*Delivered fully assembled & ready to use*
Out of stock
*Delivered fully assembled & ready to use*
In stock
Out of stock
Lumag MD300R 300kg Petrol Power Barrow with Manual Tip
Available on back-order
Transform your lawn care routine with the Lumag HGM550 Mulching Mower. Designed for efficient and eco-friendly mowing, this powerful mower is perfect for maintaining lush, healthy lawns in residential and commercial settings. Featuring a robust engine and innovative mulching capabilities, the HGM550 ensures your lawn looks pristine while promoting soil health. Great for rough areas and verges!
Out of stock
Lumag BSF15 Petrol Stump Grinder
Out of stock
Lumag LVS30-GX 135mm 32kg Petrol Trench Rammer
In stock
Introducing the Lumag HB8N Premium Petrol Log Splitter, the ultimate solution for powerful and efficient wood splitting. Designed for versatility and built to endure the rigors of heavy-duty use, this petrol log splitter is ideal for both home and professional applications.
In stock
Robot Mower Cable Laying machine
Only 1 left in stock
The new Lumag RP130-HPC is a forward/reverse compactor plate. This machine is powerful and maneuverable, great for large paved areas, trench, and groundwork. Fitted with the excellent Loncin engine (A Honda can be fitted at extra cost). The machine is easily controlled from the rubber mounted handle with both throttle and directional controls close at hand.
*Delivered fully assembled & ready to use*
Out of stock
Introducing the Lumag RP-i25N Compactor Plate, a robust and powerful vibrating plate designed to excel in subsoil consolidation and compacting small to medium-sized areas. Whether for semi-professional or professional use on medium to large construction sites, this compact yet mighty machine delivers reliable compaction performance with ease.
EAN: 4047424004068
SKU: RPI25N
In stock
*SPECIAL ORDER ONLY*
The Lumag STM450-700 Masonry Saw Bench is an excellent tool for accurate and safe cutting of tiles and masonry. Made to incorporate a dust suppression water tray and adjustable cutting head that enables you to tilt the blade 45 degrees in either direction. As with all out masonry cutting saws, you will need to purchase cutting disks separately.
*Delivered fully assembled & ready to use*
Out of stock
Features: – The RAMBO-HC10PRO effortlessly shreds branches up to a thickness of 100 mm. – Convenient operation thanks to the large filling funnel. – Integrated chassis with studded pneumatic tires and a detachable drawbar for quick (not for road use), easy repositioning even on rough terrain. – Thanks to the reinforced, professional duplex cutterhead, the…
Out of stock
The Lumag VS80-S Upright Rammer is a great value, high powered machine. The machine is driven by a reliable Loncin engine and is great for trench work and footings. The machine is robust, reliable and great value for money.
In stock
Loncin Engine single drum high grass flail mower
In stock
The Lumag KM800 road brush has hard wearing nylon bristles can be adjusted to remove anything from light debris from paved areas to scrub stubborn moss off your patio. The 800mm wide brush can be adjusted 15 degrees left or right and is great for clearing small roads and driveways. This machine is powered by a reliable and easy starting Loncin engine and comes complete with a snow plough and collection box worth £192.00.
*Delivered fully assembled & ready to use*
Out of stock
Lumag VS80-C 11″ x 14″ 80kg Petrol Trench Rammer
In stock
The Lumag G8E Petrol Generator features a fully copper wound stator and remote control electric start. Built in a sturdy wheeled steel frame with a powerful 8 kw output. This generator has 400v and 230v outputs.
*Delivered fully assembled & ready to use*
In stock
The Lumag STM350-800 Masonry Cutting Stone Saw is a robust and efficient tool designed for professional use in gardening, landscaping, and construction. Here are the key features and specifications of the STM350-800:
EAN: 4047424000908
SKU: STM350800
Out of stock
Introducing the Lumag T9230 230V Professional Log Splitter – a powerhouse in wood-splitting technology, designed for efficiency, safety, and professional performance. This log splitter is meticulously crafted to meet the latest European safety standards, ensuring a secure and reliable experience for every user.
Technical Data |
T9230 |
|
Motor | 230V / 50Hz | |
Motor power | 3,0 kW 13A | |
Operating mode | S6 40% | |
Protection class | IP54 | |
Turning speed | 2800 rpm | 2800 rpm |
Motor protection | Yes | Yes |
Phase inverter | Yes | Yes |
Splitting force | 9t (±10%) | 9t (±10%) |
Splitting diameter | 100 – 300 mm | 100 – 300 mm |
Splitting length | 560 – 1040 mm | 560 – 1040 mm |
Hydraulic oil | max. 7,0 Liter (HLP46) | max. 7,0 Liter (HLP46) |
Hydraulic working pressure | 25,5 MPa (225 bar) | 25,5 MPa (255 bar) |
Delivery rate | 5,88 l/min | |
Splitting stroke | 85 cm | 85 cm |
2 working speeds | ca. 13,9 cm/s and 3,1 cm/s | |
Reverse speed | ca. 4,1 cm/s | |
Dimensions (L x W x H) | 1420 x 1320 x 2280 mm | 1420 x 1320 x 2280 mm |
Weight (net / gross) | 164,1 kg / 174,1 kg | |
Packaging (L x W x H) | 485 x 745 x 1700 mm | 485 x 745 x 1700 mm |
Art. No. | GAMULT9230 | |
EAN | 40 47424 00964 2 |
Only 1 left in stock
Lumag RAMBO HC10 100mm Petrol Wood Chipper
Available on back-order
Equipment features:
– Closed saw protection device for more safety (according to standard 2017)
– Stable, torsion-resistant all-steel construction
– Robust and powerful circular saw motor
– Stamped barbs in the feed rocker prevent the wood from turning – Rocker
reset via spring
– Transport lock
– Carbide Saw blade Ø 700 mm
– Driving device for easy transport
– Tool for changing the saw blade
– Immediately ready for use in just a few steps
Out of stock
Equipment features:
– This forward-running vibration plate with a very large base plate is particularly well suited for paving work, repair work in path construction, gardening and landscaping.
– The repositioning of the exciter enables a particularly fast feed with this model.
– Foldable handle – compact size for transport and storage.
–
Protective grille on the exhaust, handle dampened against vibrations – Equipped with V-belts protected on all sides, protective frame, rubber mat and transport undercarriage.
In stock
The Lumag BT800 power float has a specially designed outer ring, with bump rubber, that allows you to work within a few millimeters of walls or steel beams saving hours with a trowel. It has a strong steel frame and is powered by the ever reliable Loncin engine.
*Delivered fully assembled & ready to use*
In stock
4kw inverter generator 5v usb 12 and 230v
In stock
The Lumag BT900 power float has easily adjusted blade angles using the conveniently placed knob. It has a strong steel frame and is powered by the ever reliable Loncin engine. This machine offers high productivity and is great value for money.
*Delivered fully assembled & ready to use*
In stock
The Lumag RPi13N compactor wacker plate comes complete with water tank. It is perfect for use with tarmac or dust suppression. The machine is powered by an excellent Loncin G200 engine which is easy to start and faultlessly reliable. The machine is surrounded by a frame protecting the engine and other workings. As with all our compactor plates you will need to purchase the rubber paving mat and transport axle separately.
In stock
The Lumag HOS8N New and updated for 2018 to meet the latest safety regulations the machine has also had its splitter travel speed improved further increasing productivity. The hydraulic log splitter is the second smallest of the “domestic” use machines. It is a high powered, productive machine. The machine is fast working, thanks to infinitely adjustable splitting stroke, easy and safe to use. It has a 2-hand safety control, hand protection, and flexible wood holder. Includes extension lead.
In stock
Currently expected Late January but this is subject to updates.
In stock
(delivery date subject to change)
In stock
Lumag RP1100PRO 15KN 17″ Petrol Compactor Plate
In stock
8 Ton Log Splitter
In stock
Saw Mill Bed Extension for BSW76 Extend your BSW76 bed by 198cm, additional kits can be added.
Out of stock
Saw Mill Bed extension for Lumag BSW66 Increase your BSW66 bed by 1950mm with this kit, additional kits can further increase the bed length.
In stock
Lumag RP700PRO 10.5 KN 14″ Petrol Compactor Plate
In stock
Lumag RPi12 10.5KN 15″ Petrol Compactor Plate with Water System
In stock
The following beam sizes are available at an additional cost Lumag 3.5m Tamping Beam and the Lumag 2.5m Tamping Beam.
*Delivered fully assembled & ready to use*
In stock
The Lumag G3E Petrol Generator features a fully copper wound starter and remote control electric start. Built in a sturdy wheeled steel frame with a powerful 3 kw output. This generator has 230v outputs.
*Delivered fully assembled & ready to use*
In stock
Compactor Plate Lumag VP60 8.4KN 12″ 60KG
In stock
6 way Splitter for SSA500
Out of stock
*Delivered fully assembled & ready to use*
SKU: STM200900
Out of stock